Runway Cleaning Solutions
CYCLONE's Advanced Environmental Surface Cleaning Systems are the most dramatic advancement in the history of surface cleaning.
Most existing surface cleaning methods are large, noisy and inefficient, using the same dirty water repeatedly. Operators deal with tangled hoses and wet feet. The most critical issue is hundreds of gallons of liquid laced with contaminants run off or are dumped into drains polluting the very environment that should be cleaned.
The patented CYCLONE Cleaning & Recovery Head completely removes waste and petroleum deposits from concrete and asphalt with absolutely no discharge into the environment and no damage to cleaned surfaces. All water used in the cleaning process is completely recovered and filtered, removing all contaminants which are contained and recycled. Nothing is left behind but a clean surface that dries and is usable in minutes.
Cyclone Large Cleaning Systems
CYCLONE'S large cleaning systems, the High Pressure, Hot Water, Water Recycling HP8520 and the Ultra High Pressure UHP4006 have a proven track record at Airports and Military bases across the United States.
The UHP4006 is unbeatable for removal of Runway Rubber Deposits, Concrete Cure, Coatings, and Paint Lines.
The HP8520 efficiently removes grease, oil, glycol, and other contaminants from airport gate and ramp areas.
The LP4500 is ideal Spill Recovery and Glycol Recovery, Helicopter pads, and Ship Decks.
Runway Cleaning/Rubber Removal
Since its development in 1994, the CYCLONE System has been tested in extreme environments and used at some of the biggest and dirtiest places in the world - AIRPORT GATES AND RUNWAYS.
Throughout it's product development and field-testing phases, CYCLONE has performed Gate Cleaning, Runway Rubber Removal and Paint Line Removal at most of the Airports in the Pacific Southwest of the United States. Airports like Los Angeles International Airport, Phoenix Sky Harbor International Airport, San Francisco International Airport, San Diego Airport, Portland International Airport, Las Vegas McCarran International Airport, Salt Lake City Airport, St. Louis Lambert Field International Airport, to name a just few.
We've tested the CYCLONE System in every extreme climate and environment we could find. We've also put the system to extreme testing on military bases, including aircraft carrier decks.
The CYCLONE System has proven itself extremely fast, efficient and economical at removing rubber, paint lines, curing compound, asphalt coatings, grease and oil, glycol and other contaminants from ramp and gate areas, landing strips, hangers, helicopter pads, runways and taxiways. It does so with NO discharge to the environment and NO damage to the cleaned surface
- LP4500- Ramp & Gate areas, Glycol and Spill Recovery, Sidewalks, Parking Garages
- HP8520- Rubber Removal, Ramp & Gate areas, Cure Removal, Coating Removal
- UHP4006- Rubber Removal, Paint Line Removal, Cure Removal, Coating Removal
Address
Nilfisk-Advance Technologies, Inc.- Cyclone Surface Cleaning1845 W. 1st St Tempe
Tempe, AZ
AZ 85281
USA
Tel: +1 (800) 335-9695
Email: Jim.Harrison@nilfisk-advance.com
URL: www.cycloneclean.com