Introducing the ATG Airports FX range

Company atg Airports
Date 17.03.2020

The new FX range of runway and taxiway lighting fixtures from ATG Airports are designed for maximum longevity, efficiency and visibility.

This comprehensive line-up of airfield ground lighting solutions has already had interest around the world, with enquiries from the UK, Australia, Canada, France and New Zealand.

In response to this, we are offering it to all markets worldwide on future tenders as an improvement on older lighting technologies.

What is special about the ATG Airports FX range?

The FX range of taxiway and runway lights has several unique characteristics that help to keep your airfield ground lighting visible in all conditions with less maintenance:

  • Efficient LED lighting reduces energy consumption and increases longevity
  • Helps to minimise the maintenance requirements during the lifetime of the product
  • No negative slope on fixture – prevents accumulation of water, dust or silt in front of the lens
  • IP67 ingress protection and wide operating temperature range (-55 to +55C, -67 to +131F)
  • Low 3.5mm profile improves the ride for aircraft as they travel over the fixture
  • Lower profile also reduces risk of damage during snow clearance

LED lighting technology allows for an expected lifespan of 60,000 hours for the luminaires used in the FX range, while reducing the amount of energy used when illuminated.

At just 3.5mm above-grade, the fixture’s profile is near-flush with the taxiway or runway, compared with other products that only just meet the FAA style 3 and ICAO style 4 protrusion specification of 6.3mm.

More about FX range airfield ground lights

You can find out more about any product in the FX range by browsing our website here.

Individual product datasheets are available for download, along with full information about each application.

If retrofitting FX LED runway lights into an existing system, there should be no need to replace constant current regulators as FX fixtures are compatible with existing circuits.

However, we would be happy to advise if you have any questions about doing this, for example whether or not you should re-tap the CCR to match the new circuit load.

For this and any other enquiries, please contact your ATG Airports account manager or a member of our sales team.

You can call the ATG Airports UK headquarters on +44 (0) 1942 685 555 or dial our USA sales office in Fort Myers, Florida, on +1 (239) 985-9406.

UK customers can email us at while for North America customers, you can contact us on


Global Head Office
atg airports Ltd.
Automation House
Lowton Business Park
Newton Road
Lowton St Mary's
United Kingdom
  • +44 (0) 1942 685 555