|Company||Nordic Heater AB|
Nordic Heater construct aircraft heaters to an exceptional quality using Stainless Steel to manufacture the chassis and outer casing of the heater. The heaters are powered by electric or diesel with a new hybrid option in the range there is one that will suit your needs. The aircraft heaters develop a heat capacity from 42kW up to 200kW.
Nordic aircraft heaters can be used for all sizes of aircraft from small private or military aircraft to large passenger, cargo and military aircraft, executive jet to wide bodied aircraft there is a heater that will do the job in the harshest of conditions over and over again. The build standard ensures a reliable unit that will operate when you need it which is always going to be when the weather conditions are at their worst. You can rely on Nordic Heaters to heat your aircraft.
- All Nordic aircraft heaters are made entirely out of stainless steel (ie. no corrosion)
- Nordic electric aircraft heaters are emission free
- Nordic diesel aircraft heaters use patent pending fan technology. This enables our D120 Hybrid heater to run for approx. 48 hrs without refuelling. Competitors have far lower runtimes of about 15-20 hrs.
- D120 Hybrid can run the fan off an external 16 Amp socket (it will still burn diesel for heat, but the genset can be off). This further increases runtime off of one tank of diesel.
Power package Deutz diesel, 2 cylinders with integrated oil-cooling. 23 kW.
D120 HYBRID: Burner Bentone 120 kW / 400,000 BTU.
D160 HYBRID: Burner Bentone 160 kW / 533,000 BTU.
Patent pending high performance electric fan unit with two fan speeds.
Max flow 6000 m³/h / 3531 CFM. Max pressure 3.5 kPa / 0,51 PSI.
Temperature D120 HYBRID: + 10ºC / 50ºF – + 115ºC / 239ºF. with presets + 30ºC / 86ºF and + 60ºC / 140º
The heater is equipped with a tow bar which activates the brakes on the front wheels. The fan can be powered either by the onboard generator or via an external CCE 16 Amp power source. The 16 Amp connector is mounted at the rear of the heater. The heater is equipped with engine, diesel, battery heating and battery charger as standard.
Hose longer than std 7,5 meters / 295 inch.
Spare parts kit • GPS positioning system.
Optional colors and logos.
Cable hooks, for external electric cable.
13 inch pneumatic, reinforced tires.
Hatches are supported by gas cylinders.
Chassis, frame, roof and hatches made of stainless steel.
New and highly efficient heating fan for fuel savings.
Clean and open design enables easy service access.
7,5 m long / 295 inch PVC coated, 203 mm / 7,99 inch diameter, heater air hose with very resistant PCA connection to aircraft as standard. Patented PCA connection to the cabin, made of nylon with a neoprene seal.
The connection is UV resistant and resistant to chemicals and fuel.
New burners 120 kW and 160 kW are fuel saving.
400 V 50 Hz CEE 16 Amp connector fitted outside rear panel for alternative power.
Heat exchanger is made from stainless steel. • 1000 hours service intervals.
Fuel capacity 200 litres / 53 gallon.
Operation time 48 hours.
Length 2360 mm 93 inch
Width 1400 mm 55 inch
Height 1525 mm 60 inch
Weight 1060 kg 2332 lbs