Phoenix Airport Wetlands Wailer Mk V

Description
Specifications

The Phoenix Wetlands Wailer Mk V has been designed for use in areas where cables and remote speakers are a nuisance (although 2 outlets are available for remote speaker connections if required).

These speakers will throw the natural sounds in a circle of sound with a radius of at least 1000 feet (305M). The harsh electronic sounds can be thrown up to 3000 feet.

The Airport version of the Wetlands Wailer Mk V has been designed for spot use beside an airport runway or helipad. It is equipped with 2 aviation spec outlets, should one or two remote speakers be required.

 

 

Phoenix Airport Wetlands Wailer Mk V Specifications

Product comprises of:

Master unit with 4 internal high frequency speakers.
4 high volume super-horn speakers attached to the master unit.
2 grounded speaker outlets for running remote speakers which will not cause radio interference.

MASTER UNIT PROPERTIES: –
Power Supply 12 VDC 100 micro-amps offline current
Power Supply Options 220v Electronically controlled transformer
OR
12v Deep Cycle Battery + 50W Solar panel + Regulator
Audio Output Max S.P.L at 500cms (16.5”) up to 109dB(A)
Sound Field Range Up to 60 acres (25 hectares) depending on location,
Low Frequency Speakers (4) Weatherproof audio range speaker 450Hz – 4000Hz
High Frequency Speakers (2) Piezo electric Horn Tweeter 3500Hz – 27000Hz
Temperature Range -30oC to +50oC
Light Setting Adjustable for all ambient conditions
Automatic nighttime cutoff, by light sensor or clock
Adjustable for night operation only, or 24 hrs.

Sound Emission Cycle
Adjustable quiet time between the different sound sequences 2 minutes – 60 minutes
Electronic Sound Blasts Adjustable 2 – 16 seconds per sound
Volume Controls 4 volume level settings for Electronic and Natural Sound modes separately

Operational Description

The operating program is installed into onboard flash memory using a USB Flash Drive which is then removed. It is pre-programmed to be site-specific for location and species of birds. This program can be changed or added to (e.g. new bird sounds) by sending a new program using Dropbox which is then programmed to a USB Flash drive and uploaded to the Wailer.
Operates on 12v. It is equipped with two external press buttons and an electronic display which is used to program the following: –
Quiet time between sound sequences
The system ON/OFF function can be controlled by a Light Sensor or a 24-hour clock
Preset in the program uploaded to Internal Flash Memory: –
-Selection of Day and/or Night to emit
-Variation of sound duration
– Electronic and Natural Sound sequences
– Electronic Sounds sequences only
– Natural Sound sequences only
Up to 10 different sound programs containing up to 20 sound groups which contain 16 sounds per group these programs can address different seasonal bird species. E.g. Winter, Spring and Autumn, Summer. These programs can be changed quickly using the two control buttons.

Choice of Sounds (Up to 25 different electronic sounds, plus up to 200+ Natural Sounds can be programmed into the unit).

The battery power level is displayed (e.g. 88%)
Volume Control. There are 4 volume levels for each type of sound (Natural or Electronic).
A green LED indicates the unit is operating.
Sound fidelity: Up to 44 kHz at any volume

PHYSICAL PROPERTIES: –
Size Master Unit 250 X 190 X 150 mm (9.875” X 7.5” X)
Weight 4.53 Kgs (10.00lbs)

Construction Body: high impact proof fiberglass filled with Polycarbonate IP.65

Lid: high impact proof Polycarbonate IP.65

Master Unit Consists of an electronic circuit board

Green LED light.
4 high frequency speakers
4 low frequency speakers
2 Grounded Speaker Outlets for running remote speakers which will not cause radio interference.
Stand Aluminium four leg base with FAA certified frangible coupling connected to cylindrical support bar.
Height 3 feet