Air Cargo & Material Handling Systems

Scales Special Order

All Air Cargo Ball or Roller Decks are designed to fit with the KieTek system providing optimum performance. Each scale is designed to weigh cargo pallets and containers up to 20,000 lb. Contact sales for custom scale quotes.

IQ plus® 355 Digital Weight Indicator

• Large .8" (20.3 mm) Light Emitting Diode (LED) Display
• Configurable analog to digital measurement rate
• Power for eight 350 ohm load cells or sixteen 700 ohm load cells
• Primary / Secondary units configuration: lb. kg, ounces, short tons, metric tons, grams, or none
• Nema 4XIP66 stainless steel washdown enclosure
• 5-button operation
• Two independent communication ports: (1) full duplex, (1) unidirectional or active 20 mA current loop
• Standardized EDP command sets
• Programmable ticket formats up to two 300-character printouts
• Full front-panel calibration and configuration
• Universal mounting stand
• Three-stage digital filtering
• Consecutive transaction numbering
• Two digital inputs

420 Plus HMI Digital Weight Indicator

• Large .8" (20.3 mm) Light Emitting Diode (LED) Display
• Full numeric keypad
• NEMA 4x/IP66 stainless steel washdown enclosure
• Power foreight 350 ohm load cells or sixteen 700 ohm load cells
• Configuration analog to digital measurement rate
• Primary/secondary units configuration: lb, kg. ounces, short tons, metric tons, grams, or none
• Two independent communication ports: (2) full duplex, (1) unidirectional active 20 mA current loop
• Standardized EDP command sets
• Programmable ticket formats up to three 300-character printouts
• Full front-panel digital calibration and configuration
• Universal mounting stand
• Three-stage digital filtering
• Consecutive transation numbering
• Two digital inputs, two digital outputs
• Time and date (volatile
• Count mode

Conventional Scale Deck is designed to fit into a 98” x 130” opening. Elevated to a 4.5” minimum roll plane. The deck is coated with epoxy traction paint.

Plank Scale Deck is designed to fit into a 96” x 128” opening elevated to 8.5” roll plane. Any height lower than this will require a custom conventional scale. The deck is perforated with traction holes on the topside of each plank.