Aircraft Warning Lights

WL 3000 Medium intensity obstruction light for making Towers (Telecom, GSM), Smokestacks (heat-engine and chemical plant etc),Buildings, Port devise, Construction machinery, wind power generator or any other potentially hazardous obstructions to air trafic.

Medium Intensity Warning Lights

Major Functions & Features

• Optics design based on fresnel lens principle

• Based on LED technology, aviation red

• Built-in high quality switching power supply, to improve the light life.

• Self contained compartment , screwed mounting.

• Die casting aluminum base–shockproof and corrosion resistant.

• PC lamp housing with sound impact resistance, thermal stability and luster effect.

A variety of installation is aviation.

• Sealing material: waterproof sealing ring.

• Combustibility rating:UL94-V0.

• Windspeed ability: ≥66m/s

• Light failure alarm, GPS synchronizing function.

• Mounting bracket is available if request.

Specifications

International Standard: ICAO( Annex 143) : FAA-L864

Light Source: LED

Color: Red

Voltage: AC110V0AC240V

Power Consumptions: 65W

Intensity: 2000cd +-15%

Ambient Temperature: 30-55 degrees centigrade.

Humidity: 10% – 95% (no coagulation)

LED Life: 100000h

Flashing During: 150ms – 1.5s (customised)

IP protection: IP65

Weight: 7.5kg

Installation and Operation

• Secure the light onto a smooth surface which has enough strength to hold, if there is no mounting surface, we can customize special mounting bracket at request.

• During installation, please stay away from the nearby light source, at the same time ensure the photocell is not covered by the near object.

• Make sure the power supply can match the rated power of light before connecting.

• Unfasten the two screws fixed on the nameplate and then remove the nameplate panel.

• Insert the power cable from the gland box and then connect them to the corresponding terminals inside the lamp body.

• Check whether the power cables are connected correctly before power on.

Notice

• Ensure that the power connection part is correct before switch on.

• Temperature rise when light working is normal phenomenon.

• Please do not open any components inside by yourself.

• This product is a sealed structure; Not to be tampered with by anyone other than the registered