E-50TB 915x915mm Ladder Access Roof Hatch
Company | BILCO UK |
---|
Images
The E-50TB Roof Access Hatch is ideal for applications requiring access slightly larger than the typical 915mm x 760mm opening. The E-50TB is commonly used to provide personnel access onto the roof and for moving small pieces of equipment to and from the roof area.
Features / Benefits
Thermally broken cover and frame design provide superior thermal performance.
Engineered with compression spring operators to provide smooth, easy, one-hand operation, regardless of size. BILCO hatches meet the requirements of Manual Handling Regulations.
Automatic hold-open arm locks the cover in the open position to ensure safe egress. Grip handle allows for easy, one-hand release and closing.
Overlapping cover design, fully welded corners on cover and curb, closed-cell EPDM rubber gasket, and fully insulated cover and curb ensure weathertightness and energy efficiency.
Constructed with corrosion-resistant materials to provide many years of trouble-free, dependable service.
Heavy gauge construction and positive latching mechanism maintain building security.
Curb features the Bil-Clip® Flashing System, an innovative method to quickly and easily secure single-ply roofing material to BILCO roof products.
Guide Specification E-50TB
MATERIAL | Cover and frame are 2.3mm Aluminium |
Cover | Brake-formed, hollow-metal design with 75mm concealed polyisocyanurate insulation, 127mm beaded overlapping flange, fully welded at corners, and internally reinforced for 195 kg/m² live load. |
Curb | 305mm in height with integral capflashing, 75mm polyisocyanurate insulation, fully welded at corners, and 140mm mounting flange with 11mm holes provided for securing frame to the roof deck. |
GASKET | Extruded EPDM rubber gasket permanently adhered to cover. Air leakage performance 4.83m³/hr/m² @ 600Pa Tested to BS EN 12207: 2000 |
HINGES | Heavy-duty pintle hinges with 9.5mm Stainless Steel Type 316 hinge pins. |
Latch | Slam latch with interior and exterior turn handles and padlock hasps. |
Lift Assistance | Compression spring operators enclosed in telescopic tubes. Automatic hold-open arm with grip handle release. |
Finish | Mill finish Aluminium |
HARDWARE | Plated steel compression spring tubes with steel compression springs packed in grease. Stainless Steel Type 316 hinges. All other hardware is zinc plated/chromate sealed. |
Weight | 63Kg |
Notes | National Physical Laboratory U-Value test report available upon request. Patent pending. |