Line Eraser for Removal of Line Markings


Ideal for small jobs or on-the-spot corrections, the Borum Line Eraser is a powerful, walk-behind line remover. The Borum Line Eraser can be used for removal of cold paint markings as well as thermoplastic and 2-component cold plastic markings.

A dual belt drives the cutter head assembly outfitted with three cutters:

  • To remove thin layers (e.g. cold paint markings) use the 48 pin carbide cutter.
  • To remove thicker layers (e.g. thermoplastic) use the 24 pin carbide cutter.

Made of Tungsten Carbide, both versions provide optimum wear resistance. And the tilt-up cover makes it easy to maintain and change the eraser heads.

Borum LineEraser works extremely efficient by breaking the coating and scraping across it simultaneously and leaves no sharp-edged grooves in the surface.


Weighing in at just over 200 kg, the Line Eraser is robust and stable. And with two front wheels and two swivelling back wheels, it’s remarkably easy to manoeuvre for its weight. As far as performance goes, for road markings with a thickness of 1 mm and a width of 20 cm, the Line Eraser can remove about 200 m an hour.


  • Length : 1140 mm
  • Width : 600 mm
  • Height : 900 mm
  • Weight : 204 kg