LIMBOPLAST KSP 120F

Density: approx. 1.58 kg/l +/- 0.06

Potlife: 2-5 min. (depending on the added amount of hardener, the air- and material temperature)

Solvent content: Solvent-free, do not add solvents for processing

Solvent for cleaning: Special cleaner for marking machines Art.-No.: 3086

Storage stability: 6 months; unmixed in sealed original packaging and protected from frost and direct sun light

Trafficability / curing time: Depends on the climatic conditions (cf. table “Potlife / Curing times”). In general, the marking’s trafficability must be checked before exposing it to traffic impact!

Standard packaging:
2-Comp. KSP 120F airport: Tin container of 10/15/25/40 kg filling weight
Larger containers upon request
3-Comp. KSP 120F airport: white container – 40 kg filling weight – non-reactive component
Blue container – 40 kg filling weight – reactive component
Container for reactive/non-reactive component: upon request
Hardener powder: PE-bags, filling weight corresponds to cold spray plastic quantity and mixture ratio
Liquid hardener: Plastic cans – 20 kg filling weight
Attention: all hardener types are organic peroxides – they must be separately packaged,
transported and stored from the cold spray plastics in special containers (special cartons and
boxes).
Drop-on material: paper bags with PE inlay – 25 kg filling weight

Identification:
The regulations and instructions concerning appropriate transport, handling, storage, first aid
and measures, toxicology and ecology are stated in detail in our material safety data sheets!
The instructions stated on the product label and in the MSDS must be followed.

Processing temperature: + 5°C to + 45°C

Rel. humidity: max. 75% (dew point spreadsheet has to be regarded)

Layer thickness: 0.3 – 0.6 mm depend on BASt report (dry layer thickness = wet layer thickness)

Theoretical consumption: 0.47 – 0.95 kg/m² (0.3 – 0.6 l/m²), white, the actual consumption depends on the applied layer thickness and the type and state of the surface.