LIMBOROUTE LW48F

Density: approx. 1.63 kg/l +/- 0.04 (other RAL-colors see point 3)

Solid content: ≤ 80%

Volume solid content: approx. 67.02%

Solvent-content: < 2%
Thinner: Max. 2% water to optimize the material’s properties.
Clean equipment and machinery with water.

Storage stability: 6 months; in sealed original packaging and protected from frost and direct sun light!

Trafficability / curing time:
The drying times stated in the BASt test reports (cf. table 1) are laboratory values that may
differ from field conditions depending on climate (temperature, humidity, wind), material, layer
thickness and road surface. In general the marking’s trafficability must be checked before
exposing it to traffic impact.

WOT (Wash-out-time): approx. 30 minutes after application depending on layer thickness and climatic conditions.

Standard packaging:
Plastic container with 25 kg filling weight.
Container upon request.
Drop-on material: Paper bags with PE inlay – 25 kg filling weight

Identification:
The regulations and instructions concerning appropriate transport, handling, storage, first aid
and measures, toxicology and ecology are stated in detail in our material safety data sheets!
The instructions stated on the product label and in the MSDS must be followed.

Processing temperature: min. +10°C

Surface temperature: + 10°C to +45°C

Rel. humidity: max. 75 % – (dew point spreadsheet has to be regarded)

Layer thickness /
Theoretical consumption:
Layer thickness = dry film thickness = Theoretical consumption
300 μm = 200 μm = ca. 0.49 kg/m² (0.3 l/m²)
400 μm = 268 μm = ca. 0.65 kg/m² (0.4 l/m²)
600 μm = 400 μm = ca. 0.98 kg/m² (0.6 l/m²)
The actual consumption depends on the applied layer thickness and the type and state of the
surface.