MCLO – Monitor Control Lamp Optical

Description
Specifications

1 sec lamp feedback from stop bar – 2 seconds feedback from other AGL services

OPTICAL FIBER MONITORING MODULE – worldwide patent pending

fast – reliable – free from interferences – huge data amount – lamp feedback

FAULT TOLERANCE

redundant comm – self addressing modules

SEPARATE POWER SUPPLY or POWERED BY CCRs

low consumption 0.7w each – up to 5 lamps granting always the single lamp monitoring

STURDY DEVICE

IP68 case – IP68 connectors – resin filled

Power Supply voltage Dc: (30 ÷ 60) Volt
Consumption 1 Watt
Communication protocol Optical communication
Max per channel 100
Baud rate 230.4 Kbps
Set up E, 8 bit, 1 stop-bit
Software Update available through connector (IN) / ON LINE
Address EEPROM editable through connector (IN) / ON LINE
Command Timing ON/OFF for 100-module-channel 15 ms
Detection time of burnt lamp for 100-module-channel 15 ms
Detection of burnt lamps or leds status ON
Power connectors and cable FAA style 7 female connector, vulcanized on 300 mm bipolar cable 2xAWG12, TPE insulating material (MCLO3: 3 connectors / MCLO4: 4 connectors / MCLO5: 5 connectors)
FAA style 1 male connector, vulcanized on 300 mm bipolar cable 2xAWG12, TPE insulating material
Optical Connectors PUSH-PULL No. 2 fibers OM2 Multimode OM2 50/125; IP68; Mate/Un-mate with one hand.

High optical stability

Low back reflection

Easy field cleaning

Power Supply Connectors Series 103 2 poles IP68 10.000 cycles PUSH-PULL; 13 Amp each contact